Kitchenusers logo

How to Clean Juicer Parts – Proven Tips of 2023

If you’ve been using a juicer for your health purposes, whether to lose weight, strengthen your immune system, or maintain a disease-free lifestyle, you enjoy the health advantages of juicing. However, many people loathe the chore because of the numerous obstacles that must be overcome when cleaning a juicer.

Here I would like to share with you some easy proven tips on how to clean juicer parts. This may make it easier to get rid of difficult stains and make your washing chores more manageable.

Why You Need to Clean Juicer Parts?

Do you have to clean your juicer after every use? If the answer yes or no, then what happened your juicer ? To ensure that your juicer is in top condition, you should clean it after each usage. Juicing chambers of centrifugal and the best winter juicers can accumulate fragments of fruit pulp and skin that must be removed after each use to prevent the formation of germs and mold.

What is the Best Way or Steps to Clean the Juicer

  • A. The juicer should be unplugged first.
  • B. Discard as much of the juicer as feasible. If you don’t know how to disassemble your juicer, you can generally find the instruction manual online by googling for your juicer’s make and model.
  • C. Using a spatula, remove the pulp from the bin or receptacle it was collected in.
  • D. Rinse each piece under running water.
  • E. Using small brushes, such as an old toothbrush or a nail brush, cleanse the small spots. However, if things don’t work, you can also use small scrub brushes to purchase online. You may also use dry rice or salt with some water as a scrubber by swishing the mixture around. The scouring force of a moist cloth sprinkled with baking soda also works effectively.
  • F. For extra thorough washing, fill the sink with water and add dish soap.
  • G. Use a brush or soft towel to wash each piece after soaking for a few minutes.
  • H. In particular, keep an eye on the mesh strainer, which is prone to accumulating pulp and juice detritus. Avoid allowing the juice particles to dry on this fine screen, as they will require a lot of elbow grease and attention to detail to clean.
  • I. To clean the machine, use a soft cloth or sponge dipped in water. You can be sure that even if a specific path is intended for the juice, it will end up somewhere else.
  • J. Allow for thorough drying of all components. Towels or drying racks are good places to put them.
  • K. Put the juicer back together.

You’re set for the next juicing session. Then you can find the best juicer on a budget. Now, I am going for steps to remove tough Residue.

Steps to Remove Tough Residue

Steps to Remove Tough Residue

  • A. First, disconnect the juicer.
  • B. Disassemble and clean it as thoroughly as possible using the techniques outlined in the subsection on regular juicer cleaning. Dish liquids without enzymes, such as Dawn Ultra Platinum or The Laundress, should be avoided. These products contain enzymes that break down the accumulated food over time.
  • C. After cleaning the juicer to the best of your ability, place the pieces that still have residue in them in a sink or bowl free of food.
  • D. Drop a few denture pills into the water and let the parts soak for a few hours. As long as necessary, let the tablets fizz.
  • E. White vingar and milk can be used to remove stubborn stains. It’s possible to get by with either one or the other if you don’t have the other.
  • F. If you’re soaking the remaining things in a bowl, make sure to fill it halfway with the vinegar solution. You can use a spray bottle to apply the vinegar mixture if you don’t have much to saturate the juicer pieces. The enzymes in the milk and the acid inside the vinegar help decompose the juice residue.
  • G. Allow the things to soak for as long as necessary to loosen the residue and make them easier to clean off with a brush. A spray bottle may need to be used numerous times to keep the surface moist enough for the task at hand.
  • H. You might also use salt water as an alternative. Add a teaspoon of salt to each quart of hot water and stir to combine. To ensure that the salt is completely dissolved, thoroughly mix the contents.
  • I. Use saltwater to dissolve the juicer parts’ debris and then scrape it off with a stiff brush.

The Important Tips to Clean Juice Parts

What the important Tips to clean juice parts

The following are the most useful tips:

  • Make sure you pick a juicer that is easy to use and clean. Look over the juicer’s cleaning techniques and think about how much time you’ll need to devote to it before making a purchase.
  • Don’t immerse your juicer’s metal parts for an extended period to avoid rusting. Never immerse the juicer’s lead body in water for washing to avoid damaging the juicer’s motor.
  • Before putting any juicer component in the dishwasher, read the instruction booklet.
  • Soak the juicer’s parts under refrigeration after each use, and sanitize them after the last juicing session, if necessary.
  • Only once a day should you clean your juicer if you juice numerous times a day. You can store the chunks in the refrigerator or soak them in water in the interim.

It would be best to wash your juicer immediately after use to prevent bacteria from building up. This can avoid a hard crust that is difficult to remove afterward. By following the advice mentioned above for keeping your juicer clean, fresh, healthy juices can be enjoyed at any time of day.


How do you clean the mesh part of a juicer?

Soak the juicer screen for at least a few hours in water mixed with vinegar or citric acid to clean it. Another option is to buy a commercial cleaner like Citron clean and dilute it with water 1:3 before using it. After immersing, use a cleaning brush or toothbrush to scrub the surface and then rinse it thoroughly.

How often should you clean your juicer?

Juicers need to be cleaned after each usage. Even the tiniest pulp fragments can rapidly solidify, making removal all but impossible. Bits of food will not degrade if you clean up as soon as possible. When you juice every day, clean up after yourself for five minutes.

How do you clean a mesh strainer?

First, make a solution of soapy water. Then, flip the filter over and spray it with your sink’s faucet or sprayer to remove any loose food particles that may have accumulated in it. Finally, a thorough cleaning is needed. Rinse with warm water after that. Finally, either air dry or use a soft towel to dry.

Is it easy to clean mesh?

This isn’t going to be simple. It isn’t easy to clean a mesh office chair, particularly one with mesh upholstery. This is due to the ease with which additional dust might accumulate even after washing has been completed. The user may have no choice but to replace the material if it is irreparably damaged.

Final Thought

Now you know, how to clean a juicer parts! Make sure you don’t become discouraged if you don’t get the hang of it right away.

Juicers should be cleaned immediately after use. However, this isn’t always possible. However, because nothing in life is straightforward, you may have to put in additional work from time to time to remove the pulp deposits that have become caught in your juicer. If that happens, don’t worry; your juicer will be ready for the next serving as long as you wash it well.

Cleaning is a lot easier if you wash the juicer immediately after use. !!Enjoy Happy Cleaning!!

1 thought on “How to Clean Juicer Parts – Proven Tips of 2023”

Leave a Comment